12
Creating an original song (pattern)
Creating a patch from a sample
1.
Press [F5 (Create Patch)].
A screen in which you can enter a name for the patch will appear.
For this example, we will save the patch with a name of “Gtr & Pf.”
For details on entering a name, refer to p. 10.
fig.Q1-17
2.
When you have finished entering the name, press [F6 (Write)].
A screen in which you can specify the write-destination for the patch will appear.
fig.Q1-18
3.
Use [CURSOR (left/right)] to select whether you will save the patch in the
user area or on a memory card.
For this example, select the user area (User).
4.
Use [VALUE] or [INC/DEC] to select the write-destination user patch.
For example, select “USER:001.”
The user patch data that
previously occupied that
write destination will be
erased.
QS_e 12 ページ ２００５年６月２２日 水曜日 午後３時１５分
To Next Page
Loading...
