Roland MV-8800 - Shortcut Keys

A-11
MV-8800 Appendices
Screen GuAbout
Screen GuShortcut
Screen GuGlossary Screen GuEffect Screen Preset Patches / Algorithm List Screen GuMIDI
Shortcut Keys
Here’s a list of convenient operations you can perform by simultaneously pressing multiple buttons or by using a button together
with the VALUE dial.
Shortcut Explanation
[SHIFT] + [SHUTDOWN] Access the SAVE PROJECT popup
[SHIFT] + [V-LINK] Access the V-LINK screen (Screen Guide; p. 179)
[SHIFT] + [AUTO PUNCH] Access the AUTO PUNCH popup (Screen Guide; p. 49)
[SHIFT] + LOOP [ON] Access the LOOP popup (Screen Guide; p. 48)
[SHIFT] + [JUMP] Access the JUMP popup (Screen Guide; p. 60)
[SHIFT] + [ASSIGNABLE SLIDER] Access the ASSIGNABLE SLIDER screen (Screen Guide; p. 182)
[SHIFT] + [ROLL] Access the PAD ROLL INTERVAL popup
[SHIFT] + MEAS [ ]
Forward in steps of one beat
[SHIFT] + MEAS [ ]
Rewind in steps of one beat
[SHIFT] + VALUE dial Increment/decrement a parameter value in steps of ten
[JUMP] + VALUE dial Change the sequencer time location in one-tick steps
[SHIFT] + [INC] Increment a parameter value in steps of ten
[SHIFT] + [DEC] Decrement a parameter value in steps of ten
[JUMP] + CURSOR [ ]
Erase the data in the specified range.
[JUMP] + CURSOR [ ]
Move the data in the specified range.
[JUMP] + CURSOR [ ]
Paste the data to the current location.
[JUMP] + CURSOR [ ]
Access the AUDIO EVENT PARAMETER popup (Screen Guide; p. 28)
[SHIFT] + [EXIT] Switch the operation screen (VGA/LCD).
[SHIFT] + [1] Set to Step Time (30).
[SHIFT] + [2]
Set to Step Time (60).
[SHIFT] + [3]
Set to Step Time (80).
[SHIFT] + [4]
Set to Step Time (120).
[SHIFT] + [5]
Set to Step Time (160).
[SHIFT] + [6]
Set to Step Time (240).
[SHIFT] + [7]
Set to Step Time (320).
[SHIFT] + [8]
Set to Step Time (480).
[SHIFT] + [9]
Set to Step Time (960).
MV-8800_a_e.book 11 ページ ２００６年１１月１０日 金曜日 午前１０時１９分