Troubleshooting
A-9
MV-8800 Appendices
About MIDIShortcut Keys Glossary Effect Block SpecificationsPreset Patches / Algorithm List MIDI ImplementationError Messages
Troubleshooting
■
Problems with the internal hard disk
■
Problems with the internal CD-RW drive
■
Other problems
Problem
Cause
Project contents are not
saved correctly
●
Did you save the project?
➔
Save all data needed for your song as a “project” on the hard disk.
Can’t correctly read data
from the hard disk
●
Did you perform the Shutdown operation?
➔
Make sure to save your work, and be sure to perform the Shutdown operation in order to
power down safely.
●
Could you have turned off the power while the hard disk was operating?
●
Could you have subjected the hard disk to a strong impact?
➔
Format the hard disk.
☞
DISK UTILITY screen (Screen Guide; p. 193)
Problem
Cause
Can’t read a disc
●
Could you be using a CD-R or CD-RW disc that has not yet been finalized?
●
Is the disc in a format that the MV-8800 is able to read?
➔
The MV-8800 is able to read discs of the following formats.
•
Audio CD
•
ISO9660 format CD-ROM
•
Roland S-700 series CD-ROM library
•
AKAI MPC2000/2000XL CD-ROM library
•
AKAI S1000/3000 CD-ROM library
An audio CD created on
the MV-8800 won’t play in
a conventional CD player
●
Could you be using a CD-RW disc?
➔
If you create an audio CD using a CD-RW disc, it may not be playable by a conventional CD
player. You will be able to play it using the MV-8800’s CD Player function.
Can’t write to a CD-R/RW
disc
●
Are you using a blank (empty) CD-R/RW disc?
Problem Cause
Varying the strength with
which you strike the
velocity pads does not
affect the volume
(velocity)
●
Could the [FIXED VELOCITY] indicator be lit?
➔
Press [FIXED VELOCITY] again so the indicator is turned off.
You hear the same sound
regardless of which
velocity pad you strike
●
Could the [MULTILEVEL] indicator be lit?
➔
Press [MULTILEVEL] again so the indicator is turned off.
MV-8800_a_e.book 9 ページ ２００６年１１月１０日 金曜日 午前１０時１９分
To Next Page
Loading...
