Effect Block
A-64
MV-8800 Appendices
High Damp Freq
Value: 1–20 kHz
High Damp, by attenuating the higher frequencies first,
makes the delay sound more natural. Sets the lower
frequency limit of the range to be dampened.
•
In the natural world, the high frequencies in echo die out
quicker than other bands.
High Damp Gain
Value: -36–0 dB
Sets the degree of the High Damp.
•
You can combine Low Damp and High Damp to elicit
qualities such as the room’s wall material (and sound
absorbency thereof).
High Cut Freq
Value: 0.2–20 kHz
Upper band than this frequency of the reverb sound are
gently cut to make the reverberation more stable. This
does not make time-based changings.
MV-8800_a_e.book 64 ページ ２００６年１１月１０日 金曜日 午前１０時１９分
To Next Page
Loading...
