MAKE A PHASE LOOP (Version 2):
1) Select Patch 1 “Tight Drums”
2) Hold down PLAY and then push STANDBY
3) Hit any pad to start the phrase loop (part 1 is
already pre-recorded)
4) Select a patch to record (part 2 is already
selected)
5) Press RECORD to start recording
(You can also set the quantize and tempo using
knobs 1 and 3 below the display)
6) Push the button under PART 3
7) Select another patch and start recording part 3
1) Play patches 1-20 to hear the wide variety of expressive sounds
2) Make a Phrase Loop
3) Point out the 4 dual-trigger inputs for expansion
To Next Page
Loading...
