1
This manual explains the functions that have been added in version 2 of the OCTAPAD SPD-30.
Read this manual in conjunction with the “SPD-30 Owner’s Manual.”
The number of kits has been increased to 99 (p. 2)
The number of kits has been increased from 50 to 99. We’ve added preset kits in an even broader range of styles, and kits that use a variety of
instrumental sounds.
Newly added Output Gain parameter (p. 3)
Now you can adjust the overall volume (output gain) of the entire SPD-30. By setting the output gain to “+6 dB” you can obtain a higher output level
than before.
Enhanced phrase loop settings (p. 3)
• You can now choose either “recording” or “playback” as the state after entering phrase loop standby.
• If you choose “playback,” the pre-specied phrase will be recalled, ready for immediate playback.
• In addition, you can now adjust the start of the phrase loop by the force with which you strike the pad.
Enhanced control functions (p. 4)
• You can now use a foot switch to start phrase playback. You can also press a foot switch to switch between phrase playback/stop.
• After using an external pad to start phrase playback, you can switch the phrase between play/stop by triggering the external pad.
Newly added Auto O function (p. 3)
The newly added Auto O function will automatically turn o the power four hours after the SPD-30 was last played or operated.
Support for MIDI Visual Control (p. 4)
MIDI Visual Control is now supported in addition to the existing V-LINK functionality.
SPD-30 Version 2 Supplementary Manual
* 5 1 0 0 0 3 2 3 6 8 - 0 1 *
SPD-30
To Next Page
Need help?
General
Weight and Dimensions
