Why is the sound distorted on my Roland Musical Instrument?
Sound distortion on your Roland Musical Instrument can stem from several factors. Check these settings to resolve the issue: * Adjust the ZONE LEVEL sliders. * Check the System Master Volume settings. * Review the Equalizer Input Gain settings. Also, determine whether a distortion-type effect is being applied to the sound.
What to do if there is no sound for a specific part on my Roland Musical Instrument?
If you're not getting sound from a specific part on your Roland Musical Instrument, check these settings: * Ensure the Part’s volume level isn't turned down by checking the ZONE LEVEL sliders and Part Parameter Volume settings in Edit mode. * Verify that the Part’s MIDI Receive channel matches the MIDI Transmit channel for the connected MIDI device. Adjust the MIDI Receive channel settings in the Part Parameter Receive Channel in Edit mode.
Why is there no sound in a specific range on my Roland Musical Instrument?
If you're experiencing a lack of sound in a specific range on your Roland Musical Instrument, check these settings: * Verify the key range settings for the LWR and UPR Parts in the External screen and Key Range settings in Zone Info, to ensure the range in which sounds are to be played (the key range) has been set. * Certain Tones, like Rhythm Sets, bass Tones, and Timpani, may not sound if a portion of the Tone falls outside the recommended range. * If V-Link is switched on, set the Local ON/OFF to ON in the V-Link Setting in Edit mode. This allows sounds to be played with the keyboard even when V-Link is on.
How to troubleshoot no sound from a connected MIDI device on my Roland Musical Instrument?
If you're not getting any sound from a MIDI device connected to your Roland Musical Instrument, try the following: * Ensure the device is enabled to transmit MIDI messages by setting [EXTERNAL/INTERNAL] and ZONE SWITCH to ON. MIDI messages cannot be transmitted if ZONE SWITCH is set to OFF. * Verify that the RD-700SX’s keyboard controller section MIDI Transmit channel matches the connected MIDI device’s MIDI Receive channel. Adjust the Ch (MIDI Transmit Channel) settings in the External screen.
Why is the sound being cut off on my Roland Musical Instrument?
If the sound is being cut off on your Roland Musical Instrument, it may be due to exceeding the maximum number of voices (128) simultaneously. Increase the Voice Reserve settings for the Parts you do not want to have cut off.
Why do the sounds come from the left or right each time a key is pressed on my Roland Musical Instrument?
In some Tones, the settings are such that sounds randomly play from the left or right side (are panned) each time the keys are pressed. These settings cannot be changed.
How to fix altered tones on my Roland Musical Instrument?
If the tones on your Roland Musical Instrument are altered, consider these possibilities: * A Setup may have been called up, disabling current Tone, effect, and other settings. If this is the case, resave your required settings to a Setup. * Pressing ONE TOUCH [PIANO] or [E.PIANO] may have disabled current settings, applying piano performance settings instead. Resave your settings to a Setup to restore them.
What to do if the tone doesn’t change or the keyboard is not switching to split on my Roland Musical Instrument?
If your Roland Musical Instrument's tone isn't changing or the keyboard isn't splitting, check these settings: * Ensure [EXTERNAL/INTERNAL] is set to OFF. When it's ON, the external sound generator is controlled. To change the RD-700SX’s Tones and make settings in Keyboard mode, set it to OFF. * Verify that the ZONE SELECT button for the Zone containing the Tone you want to change is set to ON. * Check if [NUM LOCK] is set to on. Tone categories cannot be selected with the TONE SELECT buttons when [NUM LOCK] is on.
Why is the pitch odd on my Roland Musical Instrument?
If the pitch sounds odd on your Roland Musical Instrument, check these settings: * Verify if Coarse Tune, Fine Tune, or Stretch Tune is set for any specific Part in Tone Info and Edit mode. * Check if the RD-700SX has gone out of tune by reviewing the System Master Tune and System Temperament settings in Edit mode, and Micro Tune settings in Piano Edit. * Also, check if the pitch has been changed by pedal operations or by Pitch Bend messages received from an external MIDI device.
What to do if song data is not played back correctly on my Roland Musical Instrument?
If song data isn't playing back correctly on your Roland Musical Instrument: * Ensure the Receive GM/GM2 System On Switch is set to ON in Edit mode. * If playing back GS Format song data, note that data created exclusively for the Sound Canvas Series may not play back properly on the RD-700SX.
General| Brand | Roland |
|---|---|
| Model | RD-700SX |
| Category | Musical Instrument |
| Language | English |
To Next Page
