To Next PageTo Next Page
Need help?Do you have a question about the Roland RD-2000 and is the answer not in the manual?
General| Pedal jack | Yes |
|---|---|
| Sound effects | Compression, Equalization, Modulation, Reverberation |
| Tones quantity | 1100 |
| Built-in speaker(s) | No |
| Number of front panel sliders | 9 |
| Reverberation effects quantity | 6 |
| Preset programs quantity | 300 |
| Keyboard name | PHA-50 |
| Keys quantity | 88 keys |
| Display resolution | 256 x 80 pixels |
| Power consumption (max) | 23 W |
| Audio (L/R) out | 2 |
| Headphone outputs | 1 |
| USB connector type | USB Type-A, USB Type-B |
| Headphone connectivity | 6.3 mm |
| Product color | Black |
| Cables included | AC |
Weight and Dimensions| Depth | 367 mm |
|---|---|
| Width | 1412 mm |
| Height | 140 mm |
| Weight | 21700 g |
Essential safety guidelines, warnings, symbols, and precautions for operating the unit safely.
Guidelines for safe placement, usage environments, and handling to prevent damage or hazards.
Important notes on power supply, unit placement, and potential noise interference.
Guidelines for product maintenance, repair procedures, and data backup/restoration.
Details regarding copyright, intellectual property rights, and software used in the product.
Instructions for safely setting up and placing the RD-2000 on the recommended KS-G8B stand.
Overview of keyboard type, power consumption, dimensions, weight, accessories, and options.
Guide to accessing and navigating various screens like MENU, TONE, PROGRAM, and SCENE.
Methods for adjusting parameters using dials, buttons, and confirming/canceling changes.
Explanation of how to use knobs, sliders, and buttons to control the unit's functions.
Comprehensive guide to the controls on the RD-2000's top panel, including wheels, knobs, and buttons.
Explanation of the display, cursor buttons, value dial, and essential function buttons for operation.
Description of rear panel jacks like Power, USB, MIDI, Pedal, Input, and Output ports.
Step-by-step instructions for safely turning on/off the RD-2000 and managing Auto Off settings.
Explanation of the controller and sound generator/effect sections of the RD-2000.
Description of temporary, rewritable, and non-rewritable memory concepts within the RD-2000.
How to select, play, and assign Tones to zones on the RD-2000.
Explanation of Programs (sound combinations) and Scenes (performance settings).
Guide to adjusting overall volume, zone volumes, and using modulation effects.
Instructions for transposing performance pitch and selecting sounds.
How to layer up to four tones and divide the keyboard into two regions (split).
Steps for registering, recalling, and managing scenes for performance recall.
Instructions for adding and adjusting reverb, delay, and tremolo effects to sounds.
How to apply and adjust modulation effects and amp simulator distortion.
Guide to adjusting amp simulation, equalizer levels, and assigning functions to controls.
How to change the types for tremolo and amp simulator effects.
Guide to using the RD-2000 with computer software via USB MIDI and audio.
Instructions for naming external zones and using MIDI controller functions.
How to configure USB audio input and output levels and assignments.
Information on using SUB OUT jacks for audio signal routing and managing output mix.
How to modify sound character, tremolo, and amp simulator effects.
How to save adjusted sounds and use modulation FX.
Details on editing zones, key touch, pedals, effects, and EQ within a program.
Using the Tone Designer to create and edit custom sounds, including piano and organ types.
Specific settings for editing TW-Organ sounds, including percussion and harmonic bars.
How to view the current settings and status of each zone on the RD-2000.
Steps for saving edited sound settings into programs and naming them.
How to swap programs and set the initial startup sound.
How to play built-in rhythms, change patterns, tempo, and volume.
Instructions for recording audio to USB flash drives and deleting recorded data.
How to select, play, fast-forward/rewind, and rename audio files from a USB drive.
Options for adjusting playback speed, transpose, volume, and output destination for audio files.
Guide to accessing the MENU, selecting system settings, and editing parameters.
How to save system configurations and format USB memory drives.
Steps to restore the RD-2000 to its original factory settings.
Procedures for backing up and restoring RD-2000 data to a USB flash drive.
A list of key combinations for quick access to basic functions and editing.
Shortcut keys for accessing effect screens and controlling parameters.
Contact details for Roland service centers and distributors worldwide for repair and support.
