6
Placing the RD-2000 on a Stand
If you want to place the RD-2000 on a stand, use the Roland KS-G8B.
Place the instrument on the stand as follows.
* Be careful not to pinch your ngers when setting up the stand.
KS-G8B
Align the mark on the
RD-2000’s rear panel with
the center of the stand
Seen from the rear
Align the seam in the RD-2000’s
panel (on the bottom, near the
front) with the corners of the
stand’s rubber feet
Seen from the side
Main Specications
Roland RD-2000: Digital Piano
Keyboard 88 keys (PHA-50)
Power
Consumption
23W
Dimensions
1,412 (W) x 367 (D) x 140 (H) mm
55-5/8 (W) x 14-1/2 (D) x 5-9/16 (H) inches
Weight
21.7 kg/47 lbs 14 oz
* Actual weight can vary slightly from that indicated due
to the fact that wooden parts are involved.
Accessories
Owner’s Manual
Power Cord
Damper pedal (capable of continuous detection)
Options
Keyboard stand: KS-G8B
Piano pedal: RPU-3
Damper pedal: DP-10
Pedal switch: DP-2
Expression pedal: EV-5
USB ash drive (*)
* Use a commercially available USB ash drive or a
USB ash drive sold by Roland. However, we cannot
guarantee that all commercially available USB ash
drives will work with this unit.
* This document explains the specications of the product at the
time that the document was issued. For the latest information,
refer to the Roland website.