Roland TD-17-L - Restoring Factory Settings

24
Overall Settings (SETUP)
Restoring the Factory Settings
The “Factory Reset” operation returns all data and settings
stored in this unit to their factory-set condition.
NOTE
When you execute this operation, all data and settings in
this unit will be lost. Before you proceed, you should save
any important data and settings to your SD card (p. 21).
1. Press the [SETUP] button.
2. Use the dial to select the “Factory Reset,”
and press the [ENTER] button.
The FACTORY RESET screen appears.
MEMO
If you want all user samples to also be returned to their
factory-set state, use the dial to add a check mark to
“Reset with User Sample.” All user samples in this unit are
overwritten by the factory-set data.
3. Press the [F3] (EXECUTE) button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
4. Press the [ENTER] button to execute.