Roland TD-27 - Page 49

| | | 0 - 3.2 |
| 00 03 | 000a aaaa | Threshold (0 - 31) |
| | | 0 - 31 |
| 00 04 | 0000 0aaa | Curve (0 - 7) |
| | | LINEAR, EXP1, EXP2, LOG1, |
| | | LOG2, SPLINE, LOUD1, LOUD2 |
| 00 05 | 0000 0aaa | ExtNoiseCancel (0 - 5) |
| | | OFF, 1 - 5 |
| 00 06 | 0aaa aaaa | Head/Rim Adjust (0 - 80) |
| | | 0 - 80 |
| 00 07 | 00aa aaaa | Scan Time (0 - 40) |
| | | 0 - 4.0 |
| 00 08 | 0aaa aaaa | Mask Time (0 - 64) |
| | | 0 - 64 |
| 00 09 | 0000 aaaa | Retrigger Cancel (0 - 15) |
| | | 1 - 16 |
| 00 0A | 0000 000a | Position Detect Head (0 - 1) |
| | | OFF, ON |
| 00 0B | 0000 000a | Position Detect Rim (0 - 1) |
| | | OFF, ON |
|# 00 0C | 0000 aaaa | |
| 00 0D | 0000 bbbb | Digital Trigger Advanced Parameter 1 (*10) |
|# 00 0E | 0000 aaaa | |
| 00 0F | 0000 bbbb | Digital Trigger Advanced Parameter 2 (*10) |
|# 00 10 | 0000 aaaa | |
| 00 11 | 0000 bbbb | Digital Trigger Advanced Parameter 3 (*10) |
|# 00 12 | 0000 aaaa | |
| 00 13 | 0000 bbbb | Digital Trigger Advanced Parameter 4 (*10) |
|# 00 14 | 0000 aaaa | |
| 00 15 | 0000 bbbb | Digital Trigger Advanced Parameter 5 (*10) |
|# 00 16 | 0000 aaaa | |
| 00 17 | 0000 bbbb | Digital Trigger Advanced Parameter 6 (*10) |
|# 00 18 | 0000 aaaa | |
| 00 19 | 0000 bbbb | Digital Trigger Advanced Parameter 7 (*10) |
|# 00 1A | 0000 aaaa | |
| 00 1B | 0000 bbbb | Digital Trigger Advanced Parameter 8 (*10) |
|-------------+----------------------------------------------------------------|
| 00 00 00 1C |Total Size |
+------------------------------------------------------------------------------+
(*10) Depending on the pad assignments that are saved within the TD-27 for digitally-connected pads, this area will be as follows.
Addresses for which the digitally-connected pad has no assignment are ignored.
Normally you should edit these parameters from within the TD-27 itself.
Digital Pad: PD-140DS
+------------------------------------------------------------------------------+
| Offset | |
| Address | Description |
|-------------+----------------------------------------------------------------|
|# 00 0C | 0000 aaaa | |
| 00 0D | 0000 bbbb | Position Adjust (0 - 9) |
| | | 1 - 10 |
|# 00 0E | 0000 aaaa | |
| 00 0F | 0000 bbbb | XStick Detect Sens (0 - 5) |
| | | OFF, 1 - 5 |
|# 00 10 | 0000 aaaa | |
| 00 11 | 0000 bbbb | dummy (ignored) |
|# 00 12 | 0000 aaaa | |
| 00 13 | 0000 bbbb | dummy (ignored) |
|# 00 14 | 0000 aaaa | |
| 00 15 | 0000 bbbb | dummy (ignored) |
|# 00 16 | 0000 aaaa | |
| 00 17 | 0000 bbbb | dummy (ignored) |
|# 00 18 | 0000 aaaa | |
| 00 19 | 0000 bbbb | dummy (ignored) |
|# 00 1A | 0000 aaaa | |
| 00 1B | 0000 bbbb | dummy (ignored) |
+------------------------------------------------------------------------------+
Digital Pad: CY-18DR
+------------------------------------------------------------------------------+
| Offset | |
| Address | Description |
|-------------+----------------------------------------------------------------|
|# 00 0C | 0000 aaaa | |
| 00 0D | 0000 bbbb | Position Adjust (0 - 9) |
| | | 1 - 10 |
|# 00 0E | 0000 aaaa | |
| 00 0F | 0000 bbbb | Choke Sens (0 - 5) |
| | | OFF, 1 - 5 |
|# 00 10 | 0000 aaaa | |
| 00 11 | 0000 bbbb | Bell Gain (0 - 32) |
| | | 0 - 3.2 |
|# 00 12 | 0000 aaaa | |
| 00 13 | 0000 bbbb | dummy (ignored) |
|# 00 14 | 0000 aaaa | |
| 00 15 | 0000 bbbb | dummy (ignored) |
|# 00 16 | 0000 aaaa | |
| 00 17 | 0000 bbbb | dummy (ignored) |
|# 00 18 | 0000 aaaa | |
| 00 19 | 0000 bbbb | dummy (ignored) |
|# 00 1A | 0000 aaaa | |
| 00 1B | 0000 bbbb | dummy (ignored) |
+------------------------------------------------------------------------------+
4. Supplementary Material
■Decimal and Hexadecimal Table
(An “H” is appended to the end of numbers in hexadecimal notation.)