Roland TR-909 - Page 18

19
[A| Tape Interface
The TR-909 features Tape Interface func-
tion that allows saving the data (Rhythm
Patterns and Tracks) written in the Me-
mory onto an ordinary audio tape for
storage and later retrieval.
[NOTE]
The data in the Bank | and || cannot be
saved at the same time (by one sequence
of procedures), so you are required to
save one Bank and the other Bank later.
In other words, you need to know which
one of the Banks is to be saved before
saving.
A. Save
[Connection]
Tape Recorder
MIC IN
(LINE IN)
Q
[Operation]
(D Set the tape recorder to recording
mode.
* |f your tape recorder features a record-
ing level control, set the level around
+3VU.
ENTER xt
(2
While
holding
the
Shift
Button
down,
press
the
Save
Key
then
the
Enter
Key.
Then swiftly set the tape recorder to
recording mode (usually by unlatching
the Pause Button).
Indicator Reaction
e г> 5 Dp
1
e» coo uo
Pilot Tone
(Approx. 6
seconds)
Modulated Normal
Tone Write or
(Approx. 13 Play mode.
seconds)