Roland TR-909 - MIB Lus Oe Weed Ық 38 6. Trigger out Stop;Start

*MIDI
MIDI (Musical Instrument Digital Inter-
face) is international standard that
enables communication of units by digital
signal.
einformation which can be communi-
cated are as follows.
1) Rhythm Pattern
2) Tempo Syncro
3) Start/Stop
4) Dynamics
5) Song Selection
6) Song Position Point
7) Through Function
= Please refer to enclosed "What's the
MIDI",
[Note]
Please never connect MIDI device to non
MIDI divice. Especially, when using
several devices, be careful not to cause
loop effect.
6. Trigger Out Start/Stop
eSetting the MIDI Channel
Please take this setting procedure in
Track Play mode.
Setting Receiving Channel: То set the
Channel number for MIDI informa-
tion which controls the internal
sound source, press the appropriate
Main Key, while holding the Shuf-
fle/Flam Button.
Setting Sending Channel: To set the
Channel number for the MID! in-
formation which controls external
sound source, press the appropriate
Main Key, while holding the Last
Step Button.
If the unit has been just turned on, the
receiving Channel is automatically set to
0, and the transmit Channel to 11. "O"
is Omni mode that receives all Channel
information.
The TR-909 provides Trigger pulse of a
positive 14V, 18ms sent out in the same
intervals as the Rim Shot written.
*Synthesizing VCO р------
MASTER OUT
RIMONO! L
SYNC OUT
ТАЮ ОЦ
START/STOP {RIM
© ©
EXT CONTR i TAPE MEMORY/SYNC
DP-2
(Option)
* You can turn on or off the TR-909
with the Pedal Switch.
38