Roland TrueVIS SG2-300 User Manual (English)

To Next Page

* All the machine sizes that we have released around the world are listed in this manual, but the machine sizes that are on sale will vary depending on the

country or area. For details, contact your authorized Roland DG Corporaon dealer or visit our website (hp://rolanddg.com/).

Thank you very much for purchasing this product.

• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through this manualcompletely and

store it in a safe locaon.

• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.

• The specicaons of this product and the contents of this operaon manual are subject to change without noce.

• This manual and the product have been prepared and tested as much as possible. If you nd any misprints or errors, please inform Roland DG Corpora-

on.

• Roland DG Corporaon assumes no responsibility for any direct or indirect loss or damage that may occur through use of this product, regardless of any

failure to perform on the part of this product.

• Roland DG Corporaon assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any arcle made using this

product.

R1-190531T

hp://www.rolanddg.com/

Need help?

Do you have a question about the Roland TrueVIS SG2-300 and is the answer not in the manual?

Roland TrueVIS SG2-300 Specifications

General

Print Technology	Inkjet
Print Resolution	1200 dpi
Media Thickness	Up to 1.0 mm
Media Type	Vinyl, banner, canvas
Ink Type	Eco-solvent ink
Ink Colors	Cyan, Magenta, Yellow, Black
Connectivity	Ethernet, USB
Operating System Compatibility	Windows
Power Requirements	AC 100-240V, 50/60Hz
Maximum Print Width	64 inches (1626 mm)
Ink Configuration	CMYK