Roland TrueVIS SG3-540 User Manual

Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through this manual com-
pletely.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specifications of this product and the contents of this operation manual are subject to change without notice.
• The operation manual and the product have been prepared and tested as much as possible. If you find any misprints or errors, please
inform us.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur through use of this product,
regardless of any failure to perform on the part of this product.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any article made
using this product.
FA02754
R1-220323
http://www.rolanddg.com/
Copyright © 2022 Roland DG Corporation

Roland TrueVIS SG3-540 Specifications

General

Print Resolution	1200 x 1200 dpi
Number of Print Heads	2
Connectivity	USB, Ethernet
Print Technology	Piezo inkjet
Media Handling	Roll-to-Roll
Print Width	54 in
Media Width	54 inches
Ink Type	Eco-Solvent
Maximum Print Width	54 in
Operating System Compatibility	Windows

Summary

Output Method

Printing and Cutting Method

Covers procedures for combined printing and cutting operations.

How to Cut with Crop Marks

Guides on using crop marks for precise cutting alignment.

Optimizing Quality and Efficiency

Optimizing the Output Quality

Discusses correction functions, media settings, drying methods, and cutting adjustments.

Optimizing Work Efficiency

Covers media settings management, output start location, time reduction, and useful functions.

Maintenance

Regular Maintenance

Outlines daily maintenance like print head checks and machine cleaning.

Advanced Maintenance

When Dot Drop-out or Dot Displacement Occurs

Addresses issues with dot drop-out and provides cleaning methods.

Handling Severe Dot Drop-out and Dot Displacement

Replacing Consumable Parts

Replacing Parts for Maintenance

Replacing the Blade/Separating Knife

Troubleshooting Methods

Output Quality Problems

Lists common issues affecting print quality and their solutions.

Problems in Cutting with Crop Marks

Media Feed Problems

Machine Problems