Step 4: Reinstalling the Machine
Procedure
1. Once the preparations are complete, move the machine with as little delay as possible.
2. Reinstall the printer immediately, and then remove the retainer securing the print heads in place.
3. Install the retainer at the position indicated in the figure for storage.
4. Turn on the main power switch.
To prevent the print heads from being damaged, move the machine with as little delay as possible and switch
on the main power as soon as possible after moving the machine. To install the machine again, follow the pro-
cedure in the Setup Guide.
IMPORTANT
5. Press the sub power button.
The home screen appears, and then the machine is filled with cleaning liquid.
Preparing to Move the Machine
Operations When Moving the Unit 319
To Next Page
Loading...
