Have you tried mixing the ink by shaking the pouch trays?
If colors are uneven, remove the pouch trays, and then shake them 50 times (for approximately 20 sec-
onds).
RELATED LINKS
・ P. 247 Mixing the Ink by Shaking the Pouch Tray
Are colors still uneven after mixing the ink by shaking the pouch trays?
If uneven color issues with ink occur even after shaking the pouch tray to mix the ink, perform "Ink Renew-
al."
RELATED LINKS
・ P. 248 Ink Renewal Method
Is the media wrinkled?
If the media is wrinkled and comes loose from the platen, colors may be uneven or the printing quality
may suffer.
RELATED LINKS
・ P. 30 Setup of New Media
・ P. 67 Setup of Registered Media
Was printing paused partway through?
When printing is paused, the coloring at the seam may be altered when printing resumes. Avoid pausing
printing. Before you perform lengthy printing, check the amount of ink remaining in the ink pouches.
Printing may also pause when data is not sent from the computer quickly enough. We recommend not per-
forming any other tasks with the computer while printing is in progress.
Is the printer installed in a level and stable location?
Never install the machine in a location where it is tilted or where it may wobble or experience vibration.
Also make sure that the print heads are not exposed to moving air. These factors may lead to dot drop-out
or reduced printing quality.
Is the media loaded correctly?
If the media is not loaded correctly or the media feed is not smooth, output may be adversely affected.
Load the media correctly.
RELATED LINKS
Colors are unstable or uneven
278 Output Quality Problems
To Next Page
Loading...
