Performing Distance Correction during Cutting
This correction is performed when you want to accurately align the lengths of cut lines when cutting. This
setting is applied to both cutting only and printing and cutting.
The movement distance of the media changes subtly depending on the media's thickness. This means that
the length of a line when cut may differ from the length setting in the data.
Procedure
1. Load the media.
2.
Tap .
3. Tap [Media Settings]>[Cutting Settings]>[Cutting Distance Correction].
4. Tap or to change the correction values.
Setting item Setting details
Default set-
tings
[Correction Value (Feed)] (correction value of media feed direction) 0.00%
[Correction Value (Scan)] Correction value of the print head movement direction 0.00%
5. Tap [Save] to confirm your entry.
6. Tap to go back to the original screen.
Accurately Adjusting the Cutting Settings
178 Optimizing the Output Quality
To Next Page
Loading...
