Roland TrueVIS SG3-540 - Preparations for Printing and Cutting Output; Step 1: Performing a Nozzle Drop-Out Test

Step 1: Performing a Nozzle Drop-out Test
Before you carry out actual printing, perform a printing test to ensure no dot drop-out or dot displacement
occurs. If dot drop-out or dot displacement occurs, perform cleaning of the print heads (normal cleaning).
When performing printing tests successively, you can select [Feed] (vertical printing) or [Scan] (horizontal printing) as
the printing position for the second and later tests in comparison to the first test.
P. 207Performing Printing Tests Arranged Horizontally
MEMO
Procedure
1. Tap
[Nozzle Drop-out Test] on the home screen.
2. Tap [Execute] next to [Printing Test].
Printing of the test pattern starts.
3. Check whether there is dot drop-out or dot displacement in the test pattern.
Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.
4. If you have opened the front cover, close it.
If no dot drop-out or dot displacement occurs, preparations for output are finished.
RELATED LINKS
・ P. 244 When Dot Drop-out or Dot Displacement Occurs
Preparations for Printing and Cutting Output
Printing and Cutting Method 127