Viewing Network Information
Use the following procedure to view network information such as the IP address and default gateway.
Procedure
1. Tap
.
2. Tap [System Information]>[Network].
You can check the following information:
• [Obtain IP Address Automatically]: Enables/disables the automatic obtaining of IP addresses
via DHCP. When this is disabled, tap to change the following settings.
• [IP Address]
• [Subnet Mask]
• [Default Gateway]
3. Tap to go back to the original screen.
• For information on how to set up a network, see the "Setup Guide."
MEMO
RELATED LINKS
・ SG3-540/300 Setup Guide
Managing the Basic Settings of the Printer
Optimizing Operation Management 217
To Next Page
Loading...
