Roland TrueVIS SG3-540 - Reducing Output Time; Speeding up Output for Narrow Media

Speeding Up Output for Narrow Media
This shortens output time by reducing the width of head movement to the minimum necessary. This is ef-
fective when the width of the media or the output data is narrow.
Procedure
1. Load the media.
2.
Tap
.
3. Tap [Media Settings]>[Other Media Settings]>[Printing Movement Range].
4. Specify the range of print head movement during printing.
[Output Data Width] Matches the range of print head movement to the output data. Movement is limit-
ed to the minimum amount necessary, and this can be expected to yield the fast-
est output. Note, however, that because the speed of media movement is no lon-
ger constant, colors may be uneven.
[Media Width] Matches the range of print head movement to the width of the media.
[Full Width] The print heads move from one end of the machine to the other. Makes the speed
of media movement constant at all times and produces the most stable printing
result.
5. Tap [Save] to confirm your entry.
6. Tap to go back to the original screen.
• Default setting: [
Full Width]
MEMO
Reducing Output Time
Optimizing Work Efficiency 205