Is the power switched on?
Switch on the printer's main power, followed by the sub power and make sure the home screen appears.
RELATED LINKS
・ P. 25 Turning the Power On
Is [Output possible.] displayed?
Output is not performed when [Output possible.] is not displayed at the top of the operation panel. After
loading the media and lowering the loading lever, tap [Setup]. Follow the instructions on the screen
to finish setting up the media. Also, when operating the setting menu, output doesn't start when data is
sent from the computer with some menu items. When you return to a menu item where output is possible
or tap to return to the home screen, output starts.
RELATED LINKS
・ P. 119 Starting Output
Are any covers open?
Close the front, left, and right covers.
Is the message [Output is currently paused.] displayed on the screen?
When [Output is currently paused.] is displayed on the screen, operation is paused. To resume, tap [Re-
sume].
RELATED LINKS
・ P. 102 Pausing and Canceling Output
Is a message displayed on the screen?
RELATED LINKS
・ P. 302 Messages
・ P. 307 Error Messages
Are the cables connected?
Connect the cables securely.
The printer unit does not run
296 Machine Problems
To Next Page
Loading...
