Prioritizing the Cutting Settings of This Machine over the Software RIP Settings
This setting is used to prioritize the cutting conditions set on the machine over the software RIP settings.
You can also make the settings for the cutting conditions in the software RIP, and normally the software
RIP settings are given priority.
Procedure
1. Tap
.
2. Tap [Preferences]>[Priority for Cutting Settings].
3. Select [Machine Priority].
4. Tap [Save] to confirm your entry.
5. Tap to go back to the original screen.
• Default setting: [Software RIP Priority]
MEMO
Accurately Adjusting the Cutting Settings
Optimizing the Output Quality 181
To Next Page
Loading...
