Replacing the Separating Knife
If the separating knife becomes dull, replace it with the included replacement knife.
Be sure to perform operations as specified by the instructions, and never touch any area not
specified in the instructions.
Sudden movement of the machine may cause injury.
WARNING
Do not touch the tip of the separating knife.
Doing so may result in injury.
CAUTION
Required item
Replacement blade for separating
knife
Procedure
1. Remove any media.
2. Tap .
3. Tap [Maintenance]>[Separating Knife Replacement].
The [Separating Knife Replacement] screen appears.
4. Tap [Execute].
The cutting carriage moves to a position where separating knife replacement is possible.
5. When [Open the front cover.] appears, open the front cover.
The procedure is displayed on the operation panel.
• Tap or to check the procedure.
• If you complete the work without viewing the instructions, tap [Finish All].
MEMO
6. Remove the separating knife.
(1) Loosen the screw until it slips out.
(2) Grasp the screw portion, and slowly pull in the direction of the arrow.
When doing this, do not pull it back toward you.
Replacing the Blade/Separating Knife
270 Replacing Consumable Parts
To Next Page
Loading...
