Step 3: Adjusting Cutting
For high-quality cutting, we recommend carrying out a cutting test to check the cutting quality for the
media before you perform actual cutting. Adjust the blade force depending on the cutting quality.
Procedure
1. Close the front cover.
2. Tap [Blade Adjustment] on the home screen.
3. Tap [Execute] next to [Cutting Test].
The test pattern is cut.
4. Peel off the cut shapes and change the [Blade Adjustment] settings according to the cutting quality.
• Two shapes are peeled off separately
You do not need to perform the setting because the blade force is appropriate.
• Two shapes are peeled off together
Increase the blade force.
• Backing paper is also cut
Decrease the blade force.
5. Tap [Save].
The changed settings are saved.
6. Tap [Execute] next to [Cutting Test].
The test pattern is cut.
7. Check whether the correction was successful.
In the [Blade Adjustment] menu, you can also make settings for other cutting conditions in addition to the
blade force.
RELATED LINKS
・ P. 174 Fine-tuning the Cutting Conditions
Preparations for Output with Crop Marks
How to Cut with Crop Marks 137
To Next Page
Loading...
