Operation Panel
No. Name Details
Status bar
Displays the printer status and indicates the next opera-
tion.
Home Displays the home screen.
Menu Displays various setting menus.
Notifications
Displays important information. When there are notifica-
tions, their number is displayed next to the icon.
Sub power Controls the power to the operation panel.
Media information
Displays the media name, media width (W), and remain-
ing media (L). This information is only displayed when
media has been set up and there is media remaining. Tap
the media width (W) or the remaining media (L) to dis-
play the [Remaining Media Management] screen on
which you can set the remaining media.
P. 210Checking the Remaining Media
Amount of ink remaining
Displays the amount of ink remaining for each ink type. If
it is time to replace ink, is displayed next to the cor-
responding type. Tap this icon to display the detailed in-
formation for the ink.
Heater Temperature
The print heater and dryer temperatures are displayed as
current temperature/set temperature. Tap one of these
items to display a screen for:
• Turning [Heater Power] on/off.
• Turning [Print Heater] on/off and setting its tempera-
ture.
• Turning [Dryer] on/off and setting its temperature.
Take-up Unit
Displays the status of the take-up unit. Tap this icon to
display the [Take-up] screen on which you can set the
[Take-up Method] and [Take-up Direction].
[Setup]/[Cancel Setup]
Starts/cancels the setting up of the media.
P. 30Setup of New Media
P. 67Setup of Registered Media
Part Names and Functions
Basic Information 15
To Next Page
Loading...
