To Next PageTo Next Page
Need help?Do you have a question about the Roland TrueVIS VG3-640 and is the answer not in the manual?
General| RIP Software | Versaworks |
|---|---|
| Take-up System | Optional |
| Print Width | 64 in |
| Print Technology | Inkjet |
| Print Resolution | 1200 dpi |
| Ink Type | Eco-Solvent Ink |
| Media Type | Vinyl, Banner, Paper |
| Media Width | up to 64 in |
| Connectivity | Ethernet |
| Power Requirements | 100-240V, 50/60Hz |
Covers fundamental aspects of the printer's operation and components, including media usage and take-up unit conditions.
Identifies and explains the printer's various components and their roles for user understanding.
Details the types of media compatible with the machine and their specific usage conditions.
Outlines specific usage requirements and restrictions for the media take-up unit.
Covers turning the printer on/off, power precautions, and sleep mode settings for energy saving.
Guides for setting up new and registered media, including roll and sheet types, and managing media settings.
Pre-output checks like LAN settings, ink sedimentation prevention, and ensuring correct output conditions.
Instructions on how to pause, resume, or cancel an ongoing output job for process management.
Procedures for separating and removing media from the printer after printing or cutting.
Steps for replacing empty ink pouches and cleaning liquid pouches when prompted by the machine.
Steps to prepare the printer for printing, including nozzle drop-out tests and cleaning procedures.
Procedures to initiate the printing process after all necessary preparations are completed.
Steps to prepare the printer for cutting operations, including heater settings and media handling.
How to perform cutting tests and adjust settings for optimal cutting quality and precision.
Procedures to begin the cutting process after all necessary preparations are made.
Steps to prepare the printer for combined printing and cutting jobs, ensuring alignment.
Methods to fix misalignment issues between printing and cutting positions for accurate results.
Procedures to start combined printing and cutting operations after setup and adjustments.
Steps to prepare for cutting operations that utilize crop marks for precise alignment.
Procedures to start outputting jobs that use crop marks for cutting alignment and accuracy.
Loading media and configuring settings for cutting operations that rely on crop marks.
Procedures to begin cutting operations that use crop marks for accurate alignment.
Techniques and settings to enhance the overall quality of printed output.
Strategies and tips to improve the speed and efficiency of printer operations.
Procedures for managing, changing, duplicating, and deleting media profiles for optimal use.
Managing printer settings and operations for overall efficiency and performance.
Important notes on handling, printer care, and basic maintenance knowledge for user safety.
Daily maintenance tasks including print head checks, machine cleaning, and part replacement.
Guidelines for storing the printer properly during prolonged periods of non-operation.
Safety guidelines and environmental considerations for proper disposal of discharged fluid.
Procedures to follow when the machine displays a message prompting fluid disposal.
Troubleshooting for print head problems like dot drop-out, displacement, and uneven colors.
Instructions for cleaning the machine's operation panel safely and effectively.
General information and procedures for replacing maintenance-related parts like wipers and pads.
Procedures for replacing the cutting blade and the separating knife for optimal cutting.
Common issues affecting print quality and their corresponding troubleshooting steps.
Troubleshooting issues related to crop mark detection and cutting alignment accuracy.
Identifying and resolving issues related to media feeding, including wrinkles and jams.
Troubleshooting steps when the print head carriage fails to move correctly or stops unexpectedly.
Diagnosing and resolving issues when the printer unit does not power on or operate.
Troubleshooting steps when the media heating system fails to reach the set temperature.
Resolving issues where the media cannot be separated properly by the cutting mechanism.
Explanations of common operational messages and required user actions for correct operation.
A comprehensive list of error messages and their corresponding troubleshooting steps.
Procedures for preparing and safely moving the printer unit, including disassembly and reassembly.
Technical details and specifications of the printer model, including area and blade information.
