Roland TrueVIS VG3-540 User Manual

Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through this manual com-
pletely.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specifications of this product and the contents of this operation manual are subject to change without notice.
• The operation manual and the product have been prepared and tested as much as possible. If you find any misprints or errors, please
inform us.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur through use of this product,
regardless of any failure to perform on the part of this product.
• Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any article made
using this product.
FA03122
R2-220527
http://www.rolanddg.com/
Copyright © 2022 Roland DG Corporation

Roland TrueVIS VG3-540 Specifications

General

Print Width	54 inches
Media Width	Up to 54 inches
RIP Software	Versaworks
Take-up System	Optional
Operating System Compatibility	Windows, Mac OS
Print Resolution	1200 x 1200 dpi
Ink Type	Eco-solvent ink
Ink Configuration	CMYK
Media Type	Vinyl, canvas
Media Thickness	Up to 1.0 mm (39.4 mil)
Connectivity	Ethernet
Power Supply	100-240 V, 50/60 Hz

Summary

Basic Operations

Setup of New Media

Guides users through the process of loading and configuring new media for printing.

Output Method

Printing Method

Details the procedures and preparations required to start the printing process.

Cutting Method

Explains the steps and preparations necessary for performing cutting operations.

Printing and Cutting Method

Preparations for Printing and Cutting Output

Outlines pre-operation checks and tests for combined printing and cutting.

How to Cut with Crop Marks

Preparations for Output with Crop Marks

Details the setup required for cutting media using crop marks for alignment.

Optimizing the Output Quality

Using the Correction Functions

Explains how to utilize automatic and manual correction functions for print quality.

Accurately Adjusting the Cutting Settings

Provides detailed steps for fine-tuning cutting parameters for precision and quality.

Maintenance

Advanced Maintenance

Covers troubleshooting procedures for print quality issues and component maintenance.

Troubleshooting Methods

Output Quality Problems

Machine Problems