Roland TrueVIS VG2-540 - Page 19

Daily Print Head Checks
17
2.Regular Maintenance
E
Press[ENTER].
The screen shown below appears, and then cleaning starts. The (approximate) remaining me
for the procedure is displayed on the screen. (The display shown below is an example. "01:45" =
"1 minute and 45 seconds")
CLEANING...
>> 01:45
When nished, the screen shown below appears again.
NORMAL CL.
AB
F
Press[ ],then[ ]todisplaythescreenshownbelow.
CLEANING
TEST PRINT
G
Press[ENTER].
Perform a prinng test again to check whether the dot drop-out and dot displacement have
been corrected.
Point
If the problem persists, try performing normal cleaning again. If the printer has been used for a long
period, the problem may not be xed even aer performing normal cleaning two or three mes. If
this is the case, perform cleaning with a dierent method.
"
P. 18 "When Normal Cleaning Is Not E󰀨ective"