Roland TurboStart VS-880 - Page 17

NQPSMTR Supplemental Notes
© 1997 Roland Corporation U.S. Re-initialization Procedures Page 6 of 9
MSQ-100 No ROM reset.
MSQ-700 No ROM reset.
MT-32 While holding MASTER VOLUME, press RHYTHM PART. Press PART 1.
MT-80s The unit resets each time you turn it on.
MT-100 While holding STOP, press DELETE. After the display flashes ALL CLEAR, press
EXECUTE.
MT-120 Power on while holding REPEAT, SONG (blue button), and PLAY. Press FWD repeatedly,
until the window reads T-13. Press PLAY, then press REC. Power off, then on.
MT-120s Power on while holding REPEAT, SONG (blue button), and PLAY. Press FWD repeatedly,
until the window reads T-13. Press PLAY, then press REC. Power off, then on.
MT-200 Power on while holding REPEAT, SONG (blue button), and PLAY. Use the DIAL to select
T-15 in the window. Press PLAY, then press REC. Power off, then on.
MV-30 (Same as STUDIO M.) No ROM reset.
OCTAPAD (Same as PAD-8.) Power on while holding MIDI CH and NOTE NUMBER. Power off and
then back on.
OCTAPAD II (Same as PAD-80.) Power on while holding both VALUE (solid < and >) buttons.
P-55 Power on while holding both INSTRUMENT buttons, then press PARAM 1.
P-330 No ROM reset.
PAD-8 (Same as OCTAPAD.) Power on while holding MIDI CH and NOTE NUMBER. Power off,
then back on.
PAD-80 (Same as OCTAPAD II.) Power on while holding both VALUE (solid < and >) buttons.
PC-150 Power on while holding COMMAND on the left edge of the keyboard.
PC-200 Power on while holding the two buttons under the word STANDARD.
PC-200mkII Power on while holding the two buttons under the word STANDARD.
All PIANO PLUS (Same as some of the HP-Series.) No ROM reset.
PK-5 Power on while holding OCT/PARAM .
PLANET-P (Same as MKS-10.) No ROM reset.
PLANET-S (Same as MKS-30.) No ROM reset.
PM-16 Power on while holding NUMBER buttons 1 and 2. (This reloads the first BANK of
settings.)
PMA-5 Press UTILITY, then press the RIGHT (>) cursor button repeatedly to select INITIALIZE.
Press ENTER, then [EXEC].
PR-100 The unit resets each time you turn it on.
PRO-E Power on while holding WRITE.
R-5 Power on while holding CURSOR PAGE and PARAM SELECT, then press ENTER twice.
R-8 Power on while holding CURSOR PAGE and PARAM SELECT, then press ENTER twice.
R-8mkII Power on while holding CURSOR PAGE and PARAM SELECT, then press ENTER twice.
R-8M Power on while holding ENTER and the RIGHT (>) CURSOR button, then press ENTER
twice.
R-70 Power on while holding MIDI and ASSIGN, then press YES twice.