Roland TurboStart VS-880 - Page 20

NQPSMTR Supplemental Notes
© 1997 Roland Corporation U.S. Re-initialization Procedures Page 9 of 9
TR-808 No ROM reset.
TR-909 Power on while holding TRACK #1 and PATTERN #1 .
U-20 No ROM reset.
U-110 Power on while holding PART and EDIT.
U-220 No ROM reset.
VG-8 Power on while holding F1, F3, and F5. Press F6 for All, F4 for Patches, or F2 for System.
VK-7 Power on while holding MAIN, SUB and PEDAL in the HARMONIC BAR PART section.
VK-1000 Press WRITE, then press F3 to access the INIT MENU screen. Press F4 to access the
COLD BOOT screen, then press ENTER.
VP-70 Power on while holding PLAY, VOICE EXPANSION, and MIDI.
VS-880 No ROM reset.
VT-1 Power on while holding down the PRESET/USER button.
W-30 No ROM reset.
W-50 Press CONTROL and MASTER simultaneously. Use PARAMETER UP (^) and DOWN
(v) to select ALL. Press VALUE UP (^).
XP-10 Press UTILITY. Use VALUE + and - to select INITIALIZE, then press ENTER. Use
VALUE + and - to select FACTORY PRESET, then press ENTER.
XP-50 Press DISK/UTILITY, select SOUND, select PRESET, then press ENTER. Use the dial to
turn Memory Protect OFF if necessary, then press ENTER twice.
XP-80 Press UTILITY, press F6 (MENU) twice to select Factory, then ENTER. Press F6
(EXECUTE). Use the dial to turn Memory Protect OFF if necessary, press ENTER, then
press F6 (EXECUTE).