7
Panel Descriptions
No. Name Description Page
8
Cross-point display
This displays cross-point information for input channels.
Upper line This displays the label names of the input channels. You can specify any names you want for the labels.
Lower line
This displays the functions currently assigned to video channels.
5 PGM: Output video channel
5 PST: Video channel to output next
5 C1–C4: Composition (PinP/Key) source channels
5 AUX1, 2: AUX bus 1 and 2 output channels
* When a [USER] button in the DELEGATION area (
) is selected, these display the user function.
-
9
[AUX] buttons
These select the video channels output to the AUX buses (two) and video channels used for composition. They also
access assigned user functions.
You use the DELEGATION area buttons (
) to specify functions for the [AUX] buttons.
-
10
Cross-point buttons
These select the video channels to output.
PGM (program) section These select the video signal to output to the PGM bus. The selected button lights up in red.
PST
(preset) section These select the video signal to output to the PST bus. The selected button lights up in green.
p. 11
11
DELEGATION area You use this to switch the functions of the [AUX] buttons.
-
COMPOSITION [1] – [4] buttons These select the composition (PinP/Key) 1 through 4 video channels.
-
AUX [1] and [2] buttons These select the video channel to send to AUX bus 1 or 2.
-
USER [1] and [2] buttons These select the user function assigned to user setting 1 or 2.
-
12
[CUT] button This switches PGM output or PST output with a cut.
p. 11
[AUTO] button This makes the video switch automatically. The transition eect selected using TRANSITION TYPE is applied.
13
Video fader
This is a T-bar video fader. You operate the video fader to switch the video.
The transition eect selected using TRANSITION TYPE is applied.
p. 11
To Next Page
Loading...
Need help?
General
