Roland V-Mixer VM-3100 - Page 12

Front Panel Section
1 Faders
Channel Faders
These faders adjust the volume of the signals input to
each channel. The SELECT buttons can be used to select
channels to make changes to effects, PAN, or other
settings.
MASTER Fader
The MASTER fader adjusts the output volume of the
signal mix from the channels. Press the MASTER
SELECT button to make effects settings that affect the
main mix and to access other functions.
2 SOLO Button, MUTE Button
SOLO
CJ
MUTE
These buttons determine the functions of the SELECT
buttons. Press SOLO to output only the sound of a
selected channel; press MUTE to mute the sound.
12
FADER ASSIGN Buttons
These buttons are used to determine the operation
performed by the fader.
AUDIO CH: When this is pressed, the faders can be
used to adjust the audio signal level of
each channel.
MIDICH: When this is pressed, the faders can be
used to adjust the level of external MIDI
devices (such as MIDI sound modules or
keyboards).
3 Screen (Display)
This functions as a level meter and also is used to display
channel settings and other information.
4 LEVEL METER Button
LEVEL
METER
—
This button selects the LCD display mode.
- INPUT METER
Hold down the LEVEL METER button and use the
FUNCTION buttons [F1]-[F4] to switch between the four
following screens.
- OUTPUT METER