Roland V-Mixer VM-3100 - Saving and Recalling Mixer Configurations; Saving Mixes to Scene Memory; Recalling Saved Scenes

Rotate
the
VALUE
volume
V1
knob,
adjusting
the
reverb
level.
After
MEMD
Now
you
can
change
the
level of the signal sent to
EFFECT1 (FX1).
USING THE UNIT SAFELY.
IMPORTANT NOTES eic.
confirming that the reverb effect is being applied to the mic sound,
adjust the reverb to a suitable level.
AUX RUX
Pst Pst
®B 4
When you have finished making these settings, press the [LEVEL
METER] button to return to the first LEVEL METER screen.
What is the. VM-2100 Series
Y-Midng Station?
LEVEL
METEA
Cc
i oc
i — TES
aa HT
le L-R
Fstli2a4se1890
Saving your mix to a Scene
Pari Names
After making these settings — channel fader adjustments, MASTER
fader volume levels, PAN settings and effects added to the mic sound
— you may find that you want to use them again. The VM-3100 features
a “Scene Memory” function which allows you to save the current mixer
configuration and settings.
Press a SCENE button to save the current mixer settings.
A scene can be saved to any unlit Scene button. Press the [SCENE1] NEM
button.
The
button
will
light
when
a
Scene
Memory
has
been
saved
to
SU
Instructions
for
additio ks ee
scenes and clearing previously
SCENET
CoE]
i a
that location.
saved scenes can be found
on p.27.. Lele
Recalling a previously saved scene
Digital Mixer Workbook
After saving a Scene, lower all of the faders, turn the power off and then
on again. After the initial boot-up process, press the [SCENE 1] button.
SCENE!
wm
Q
8
e
oa
coe
Qa.
<x
Confirm that the Scene was recorded
Speak into the mic while playing back a CD in the CD player. Even with
the faders down, the signals are mixed using the same settings that
were just saved.
23°