Roland V-Mixer VM-3100 - Creating Demo Tapes at Home; Connecting and Adjusting Instruments;Mics

Making Demo Tapes at Your Home
Connecting Instruments and Mics and Adjusting the Sound
The VM-3100’s compact design and high sound quality make it ideal
for making your own demo tapes. The VM-3100 also includes a nore ee
To prevent malfunction
and/or damage to speakers
or other devices, always
compressor effect that is perfect for recording vocals. You may use the
following procedure to create your own demo tape.
q turn down the volume, and
Refer to the following figure and connect your equipment. turn off the power on all.
After completing the connections, adjust the volume level for each devices before making any
device. connections.
Speakers MEMD
d : The compressor can be
applied when connected to.
Channels 1 and 2 (initial
settings).
Although this describes
connections used for :
recording to a multitrack
cassette recorder, the VM-
3100 can also be connected
to an MD or DAT recorder.
In this case, we recommend
to use the digital output.
AUX SEND
BUS OUT
MASTER OUT
MONITOR
ON
re
J 1
a-
be
DD
aa
22
DIGITAL IN AorB
DIGITAL OUT A DIGITAL OUT B
Adjust the keyboard level.
Raise the channel fader 5-6 for the channel to which the keyboard is
connected to 0 dB.
ee aa tae Before proceeding with an
iam Cod operation, you can press)
: the [LEVEL METER]
button to call up the Level
Meter screen.
28