Roland V-Mixer VM-3100 - Scene Memory Management; Clearing and Modifying Scene Memory; Selecting and Navigating Scene Banks

e77
5 w :
ane
22
2. The VM-3100 switches to the previously stored settings. The current we
fader and knob positions have no effect on the mix. gE
a ge
| Pt
i open
Clearing a SCENE MEMORY
1. While holding down the [SHIFT] button, press the SCENE button
for the SCENE you want to clear. :
seip
V-Mixing Station?
2. The contents of the stored settings will be deleted, and the button
Once data is cleared from
What is the VM-3100 Series
will
no
longer
light.
aay
SCENE
MEMORY,
it
SCENE?
SCENE
cannot
be
recovered.
Use
Cec]
aes)
+
smaccaaac
ie
due
catition
when
clearing
SCENE MEMORY.
Changing the settings of a SCENE MEMORY
When you want to record new mix settings to a scene location which
has already been used, first clear the SCENE MEMORY location.
After confirming that the button is no longer lit, press the SCENE
button once more to record the new settings.
Selecting different banks of scenes
SCENE 1 to SCENE 4 comprise one BANK, and there are eight banks (a
total of 32 SCENES) which you can use to store your mixes. 8
1, While holding down the [BANK] button, press the [SCENE3] 3
button to increase the BANK number by one. a
rs
e
a
2. While holding down the [BANK] button, press the [SCENE4]
button to lower the BANK number by one.
BANK SCENES
1-8
*t
3. For example, if you want to select “BANK 3, SCENE 3,” hold down
the [BANK] button and press the [SCENE3] button twice, then
release the [BANK] button and press the [SCENE3] button once.
SCENES SCENES SCENES
n
D
2
aod
fo
rey
a
a
<
POSHSESHSSSSSSHHSHSHHOSHSOSHSSSSESESSESSSSHASSSSOESHSSHSSSHSSSSSSSSHSSHSSHSEHSHSHSSHSSSSSSOSSESHESSES