Roland V-Mixer VM-3100 - Digital Mixer Workbook: Advanced Features; Speaker Modeling Functionality (VM-3100 Pro); Effective Use of Scene Memory

2
MEM
Set the DS-90 Digital Monitors. Fac mie dotleoe mies
Set the DS-90 Digital Monitors so that you can input the digital signals _ setting, refer to the owner’s
into their digital input connectors. manual for DS-90.
Examine the difference produced by Speaker Modeling. (VM-3100Pro Only)
By selecting a patch using the “Speaker Modeling” algorithm for mas
Effect2, you can audition your mix with various sound characteristics
of different speakers.
1. Press [EFFECT2].
2. Select a patch using “Speaker Modeling” by turning the value
dial, then press [ENTER/ YES]. MEMO
3. Press [F1-F4 ON/OFF], then [F2](LOC). ioe the effect patches using
4. Set “Location” to “INS MASTER” to insert the Effect2 to the “Speaker Modeling”, refer
mix bus. to. the “Effect Patch List”.
Switch the patches using “Speaker Modeling” and audition your mix
with various sound characteristics of different speakers.
POSS OHSSSHSESSSOTSEHSSSSSOHSHSSHESHSHSHOSSSSOSSHSSSSHSHSHSSSSSSSSSHSSSHHSSHSSSHSSEOSHHTESEEE
Skillful Use of SCENE MEMORY
The VM -3100 allows you to store up to 32 different mixes as scenes,
making it ideal for use in live situations with PAs, for multitrack
recording, and in other situations where adjustments to mics and
instruments are required. Many events require adjustment of the mixer
settings for each program or act. You might save the mix for vocals with
accompaniment to SCENE 1, the settings for announcements or
addresses during intermission to SCENE 2, and the settings for mics
used for a chorus to SCENE 3. Later, at each point in the program, you
can call up the settings with the press of a button. We strongly
recommend gaining proficiency in the use of scenes to take full
advantage of the VM-3100s power.
Saving your mix to a SCENE MEMORY
1. After adjusting the faders and effects, press an unlit SCENE button.
2. The button will light, indicating the mix is stored to that SCENE
location.
Recalling a mix from SCENE MEMORY
1. Press a lit SCENE button.
26