Roland V-Mixer VM-3100 - Page 32

32
Set “Bus 1/2” to “BUS” by turning the value dial.
‘eae ete »
—————
a a I
Assign the mixer channels to each track of the MTR.
Press the [BUS ASSIGN] button.
[fousasein
f aircaaer
CI
Press the [SELECT] button of the channel to be sent to the MTR. EMD
EM!
With a four-track recorder,
CoC track selections are as
LZ =. § Te fom eral ara follows.
a ca ri PS Co Oo :
rs E - Track 1........BUS-L
- Track 2 3... BUS-R
= 3 : 2 bi > Track 3........ AUX-1
E ame ~ Track 4 «.-...AUX-2
=.
ie a
Highlight “1/2(AUX)” or 3/4(Bout)” in the display by pressing the
cursor button BJs.
Check whether the signal is being sent or not by turning the value dial.
The settings are as follows:’.
* Tosend the signal to tracks 1/2
—P Select “1/2(AUX)”.
OS76<hsr4>
O 7/68 CpautB >
© To send the signal to tracks 3/4
—P Select “3/4(Bout)”.
4
OS/6¢hs-4 >
O 7/8 Choute >
Turn up the channel faders 9-10 and 11-12 so that the playback sound
of the MTR is heard.