Roland V-Mixer VM-3100 - MIDI Control via Computer; Computer and MIDI Sound Module Connection; Configuring Scenes for MIDI Control

Control Using MIDI IN/OUT |
Using a Computer for Remote Control of the VM-3100
While a MIDI keyboard, footswitch, or other means may be used for
controlling the VM-3100’s SCENE MEMORY, another convenient
method involves the use of sequencer software. In this section, we will
USING THE UNIT SAFELY
i IMPORTANT. NOTES “Bigs: >
use a sound module to play performance data created on a computer
software sequencer, and layer vocals and guitar over it.
Connect the computer and the MIDI sound module.
The computer and the sound module are connected with an internal nore ce
MIDI interface. ge Prevent malfanction
and/or damage to. speakers
or.other devices, always
turn down the volume, and
turn off the power on all
devices before making any
connections.
~ What is the VM-3100 Series
V-Mixing Station? :
In addition, you must have commercial sequencing software such as
“CAKEWALK” installed and configured on the computer.
Personal
Computer
Part Names
Before proceeding with an
operation, you can press
the [LEVEL METER]
button to call up the Level
Meter screen.
AUX SEND
BUS OUT
MASTER OUT
MONITOR
Trying Out the VM-3100
on
sae
ao
bE
2D
aa
zz
DIGITAL IN AorB
DIGITAL OUT A DIGITAL OUT B
Make the settings for each SCENE.
Within a song, the mixer settings may be different for the intro, vocal
sections, guitar solo, and other sections. First store the mixes for each
part to SCENE MEMORY.
Starting playback of the sequencer causes the MIDI sound module to
produce the instrument sounds, with the mixer settings determined as
the actual performance progresses.
For the intro, adjust the MIDI sound module and guitar channel faders
to balance the volume levels of those instruments.
a
a
e
3
=
a
a.
<
al