Roland V-Mixer VM-3100 - Page 85

VM-3100 EZ Routing Set List
14 ALL SENDs
In this configuration, the AUX SEND and BUS OUT jacks
and the DIGITAL OUT A and B connectors are all used for
sending signals either to external effects or to performers’
monitors (five signals, two monaural and three stereo, can be
sent).
BUS OUT D.OUTB
AUX SEND D.OUTA
Omie
Os 4
Os 56
Os 728
MONITOR
MASTER
Om :Send MONO
Os -send STEREO
Q ~~ :Bus
15 PA MIXER
This contains the settings for using the VM-3100 as a PA
mixer equipped with sends for the performers’ monitors
(shown in the connection diagram on p. 38 of the User’s
Manual). The AUX SEND jacks send two monaural signals.
MASTER OUT jacks are connected the input section of the
PA amp or main mixer.
BUS OUT D.OUTB
AUX SEND D.OUTA
Omuie
O 34
Q 56
7/8
MONITOR
MASTER
@ mM :Send MONO
Os :Send STEREO
QO :Bus
16 RMDB DIRCT
This selects the settings needed to send the output of
Channels 1-8 directly through the eight-channel digital
output of the RMDB I connector (VM-3100Pro only).
RMDB II Digital Output
Ti1/2 (Tr. 3/4 Tr SGOT. 7/8
CH 01/02
CH 03/04
CH 05/06
CH 07/08