Roland VR-50HD MK II - Page 3

3
Panel Descriptions
Top Panel
Video Mixer Section
Common Controllers
23 USB MEMORY port
Connect a USB ash drive here. It is used when loading a still image,
or when saving or loading settings.
24 PHONES jacks
(Front panel)
Connect headphones here. Two sets of headphones can be used
simultaneously.
25 Monitor
(touch panel)
Shows the input/output video, a loaded still image, or a menu
screen. Touch the screen to select a menu item.
26 Menu operation area
[MENU] button
Switches the menu screen between visible and hidden.
[EXIT] button
Returns you to the menu one level higher.
[ENTER] button
Executes an operation.
[VALUE] knob
Selects a menu item, or edits the value of a setting.
19 STILL/INPUT SOURCE
[SELECT] button
Selects the function of the [1]–[4] buttons. Each time you press
the button, it cycles in the order of lit green
0
lit red
0
unlit (no
function).
[1]–[4] buttons
5
When the [SELECT] button is lit green
Select the video source that is assigned to each VIDEO INPUT SELECT
[1]–[4] button. The lit color of the button indicates the video source.
Lit color Video source Lit color Video source
Blue SDI IN Magenta COMPOSITE IN
Green HDMI IN Yellow RGB/COMPONENT IN
5
When the [SELECT] button is lit red
Select the still image that is assigned to the VIDEO INPUT SELECT
[STILL] button. The selected button is lit red.
20 VIDEO INPUT SELECT
[1]–[4] [STILL] buttons
Select the video that is output: an input video (1–4) or the still image
(STILL). The selected button is lit.
[INPUT ASSIGN] button
Shows a menu screen where you can select the video source for the
[1]–[4] buttons.
21 HDCP indicator
This indicator is lit, blinking, or unlit according to the HDCP (copy
protection) setting and according to whether an HDCP-compliant
device is connected.
22 COMPOSITION
[PinP] button
Turns PinP (picture-in-picture) composition on/o. When on, the
button is lit.
[SOURCE] button
Shows a menu screen where you can select the inset screen video.
[PinP/KEY] button
Turns key composition on/o. When on, the button is lit.
[SOURCE] button
Shows a menu screen where you can select the video that will be
composited.
[KEY LEVEL] knob
Adjusts the degree of extraction (transparency) for the key.
[STILL KEY] button
Turns on/o key composition using a still image (logo or image).
When on, the button is lit.
[SOURCE] button
Shows a menu screen where you can select the still image that will
be composited.
[KEY LEVEL] knob
Adjusts the degree of extraction (transparency) for the key.
25
26
What is program (PGM) output?
This is the video output that reects all processing, such as video
compositing. With the factory settings, this is output from the
PGM connector.
This is the video that is seen by the people who are watching the
live stream or presentation.
14 15
16
17
18
19
20
21
22