1
Press [UNDO].
“UNDO Level=” appears in the display.
2
Use the TIME/VALUE dial to specify the conditions to be
restored, i.e., the number of previous steps to be undone.
3
Press [YES].
The UNDO indicator lights, indicating that the UNDO has been executed prop-
erly. If you wish to cancel the Undo, press [NO].
For more detailed information, please refer to “Recording and Editing
Operations Which Can Be Undone (Undo)” (Owner’s Manual p. 147).
To cancel only the immediately preceding step, please refer to
“Canceling Only the Very Last-Performed Operation” (Owner’s
Manual p. 147).
To Next Page
Loading...
