Roland VS-880EX - Chapter 3: Multi-Track Recording; Recording Setup and Process Overview

Combining the Contents of Tracks While Adding Effects.
Sometimes you may want to apply effects to previously-recorded tracks and
then record the sound to an another track. Here is how to use the effect to add
reverb to Tracks 1–3 and bounce these tracks to Track 4. This can be convenient
when you want to mix down while adding spatial effects such as reverb and
delay to each track.
1
Press [EFFECT] several times until “EFFECT-1 PRM?” appears in
the display.
2
Press [YES].
The number and name of the currently selected effect will appear, allowing you
to select the type of effect.
3
Use the TIME/VALUE dial to select the type of effect (Patch).
Here, let’s select “A00 RV:LargeHall.”
2,4
3,8
10
5 1
11 7
6
12
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIME
48
24
4
0
dB
12
Completing the Song (Mixdown)
40