Roland VS-880EX - Page 59

EQM (Equalizer Mid)
This adjusts the center frequency (200 Hz–8 kHz) and
Q (definition: 0.5–16) of the mid-range (peaking)
equalizer.
12. Hold down [SHIFT] and press the channel 5 [EQ
Hi (SELECT)].
13. Use CURSOR [ ] [ ] and the TIME/VALUE
dial to make the setting.
EQH (Equalizer High)
This adjusts the gain (-12–12 dB) and the center fre-
quency (500 Hz–18 kHz) of the high-range (shelving)
equalizer.
14. Repeat Steps 1–12 if you wish to make adjust-
ments to other equalizers.
15. When you are finished making the adjustments,
press [PLAY (DISPLAY)].
Return to Play condition. If necessary, save the song
(p. 43).
* The 3-band (low, mid, high) equalizer can be used on
channel faders in only one mixer mode — either the Track
mixer or Input mixer — at a time. You cannot use the
equalizer in both mixers simultaneously on the same
channel. For example, if you are using the 3-band equaliz-
er on Track 1, then you cannot use it on Input 1.
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIME
48
24
4
0
dB
12
Frequency Q (definition)
EQM Q
(0.5–16)
Gain
0
-
+
Frequency
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIME
48
24
4
0
dB
12
Gain Frequency
EQH frequency (500 Hz–18 kHz)
Frequency
EQH gain
(-12–12 dB)
Gain
0
-
+
Chapter 3 Multi-Track Recording
59
Chapter 3