Do you have a question about the ROLEC SecuriCharge ROLEC0111B and is the answer not in the manual?
Provides warnings, cautions, and notes for safe operation and installation.
Lists key features of the SecuriCharge Intelligent EV Charging Unit.
Explains the requirements and benefits of 'Smart' enabled chargepoints.
Details the optional load balancing capability to prevent power overloads.
Describes load management features for dynamic power adjustment.
Explains how the chargepoint interacts with electricity providers for demand management.
Details the TruePEN system for fault detection and isolation.
Outlines the dual-level anti-tamper protection measures for security.
Lists all items included in the chargepoint package.
Details optional components and accessories available for purchase.
Essential checks and considerations before commencing installation.
Step-by-step guide for physically mounting the chargepoint unit.
Instructions for installing the optional load balancing system, including CT clamp connection and configuration.
Steps to initiate the chargepoint setup using the Rolec EV Connect app.
Post-configuration steps, including customer engagement and maintenance plans.
Guide to using the mobile app for chargepoint operation.
Explains the meaning of different LED status indicator lights.
Methods for safely terminating an EV charging session.
Best practices for using, storing, and maintaining charging cables and sockets.
Routine cleaning and inspection procedures for the chargepoint.
Information on how software updates are delivered and installed.
Schedule and procedures for regular inspection and electrical testing.
| Rated Supply Frequency | 50Hz |
|---|---|
| Standards Compliance | IEC 61851-1, IEC 62196-2 |
| Input Voltage | 230V AC |
| Output Voltage | 230V AC |
| Charging Ports | 1 |
| Compatibility | Electric Vehicles with Type 2 Connector |
| Mounting | Wall |
| Connector Type | Type 2 |
| Rated Supply Voltage | 230V AC |
| Protection Features | Overcurrent, Overvoltage |