Need help?Do you have a question about the ROLEC BasicCharge ROLEC0211B and is the answer not in the manual?
Provides essential safety information and guidelines for the installation and operation of the product.
Details the key functionalities and capabilities of the BasicCharge EV charging pedestal.
Explains the 'Smart' capabilities of the chargepoint, including connectivity and remote management.
Describes the optional Load Balancing feature designed to prevent property power supply overloads.
Explains Load Management, which dynamically adjusts charging power based on property demands.
Details Demand Side Response (DSR) where the electricity provider controls chargepoint power draw.
Explains the TruePEN system for PEN fault detection, removing the need for a dedicated earth.
Outlines the security requirements, including two-levels of anti-tamper protection.
Details for single-phase units, including models, output, and input supply.
Details for three-phase units, including models, output, and input supply.
Covers user interface, charge protocol, protection, communications, energy metering, lighting.
Details dimensions, weight, environmental ratings, materials, colour, and warranty.
Lists the various certifications and regulatory compliances the product adheres to.
Covers standard contents upon unpacking and available optional accessories for the chargepoint.
Details regarding product rating, serial number, socket ID, configuration, and operational labels.
Crucial checks for signal strength and equipment sensitivity before proceeding with installation.
Ensuring adequate mobile network or Wi-Fi signal strength is crucial for chargepoint communication.
Advice on performing insulation resistance tests before connecting cables to avoid damaging sensitive components.
Instructions for preparing the site, including ground mounting base or direct surface mounting.
Steps for preparing and setting the ground mounting base for the chargepoint.
Steps for preparing the ground and marking mounting holes when not using a base.
Diagrams illustrating the electrical connections and components of the chargepoint models.
Step-by-step guide for physically installing the EV charging pedestal unit.
Procedure for installing the optional Load Balancing system before completing standard installation.
Final checks and steps to complete the chargepoint installation after configuration.
Final tests including service provider label application and testing of the LED illumination.
Guide to using the VendElectric app for operating and monitoring the chargepoint.
Explanation of the LED status indicators and their meanings for chargepoint operation.
Steps for initiating an EV charging session using the mobile app or RFID card/fob.
Information on charge status, default/peak hours, and randomized delay for charging sessions.
Methods for safely ending an EV charging session and securing the chargepoint.
Guidelines for using, storing, and maintaining charging cables and sockets to prevent damage and ensure safety.
Details on the cable locking feature and proper storage of charging cables.
Instructions for safely replacing the LED bulbs in the chargepoint's lighting head.
Regular cleaning, inspection, and functional testing of the chargepoint and switchgear.
Guidelines for cleaning external surfaces and inspecting for visual damage or debris.
Procedures for testing switchgear and performing annual electrical inspections.
Advice on cable care, site maintenance plans, and engineer qualifications.
Information on why and how software updates are performed on the chargepoint.
Recommended quarterly inspection and testing schedule for chargepoint maintenance.
General| Model | ROLEC0211B |
|---|---|
| Charging Mode | Mode 3 |
| Rated Current | 32A |
| Connector Type | Type 2 |
| Charging Ports | 1 |
| Rated Voltage | 230V |
| Output Voltage | 230V AC |
| Output Current | 32A |
| Compatibility | Electric Vehicles with Type 2 Connector |
| Charging Time | Varies depending on vehicle battery capacity |
| Input Voltage | 230V |
To Next Page
