Maintenance
BasicCharge Intelligent EV Charging Pedestal EVBM-V01-R1 Installation and Operation Manual
Page 33 of 36 December 2022
7. Make sure the top cover is clean and free of debris. Pay particular attention to
the rubber seal that runs around the inside edge of the cover.
8. Place the top cover onto the light diffuser.
x Make sure the top of the diffuser sits cleanly and squarely against the rubber
seal in the top cover.
9. Secure the top cover to the lighting head with the bolt and sealing washer
removed at start of the upgrade process.
x Make sure the rubber side of the washer sits against the top of the cover.
10. Turn ON electrical power to the chargepoint.
To Next Page
Loading...
