2-2 Functions of the buttons on the control box :
Red button:
Up manual raising of the vehicle
Down manual lowering of the vehicle
Green button :
set to automatic mode or system initialisation (chapter 3-1)
2-3 Hydraulic connection diagram :
For confidentiality reasons, we will not disclose our hydraulic circuit
diagram. In case of hydraulic concerns, please contact us..
Comment :
- A system for counter roll of the vehicle is provided in the assembly. Oil
will never "take the easy route". The load will constantly be equal over the four
wheels, which allows us also to "dispense" with a tipping stabiliser.
-The pressure relief valve is intended for smoothing out any abnormal pressure
peaks (violent dynamic shocks).
To Next Page
Loading...