6
ENGLISH
Battery
Before using the device for the first time, you must fully charge
the battery.
Charging the Battery
1. Connect the camera to a computer or USB power supply
(5 V/1~2 A recommended / not included).
2. The red charging status light remains flashing while the battery is charging.
3. The red charging status light will light continuously when the battery is
fully charged.
Changing the Battery
1. To open the battery compartment, use the recess on the battery
compartment cover. Use a fingernail, or a flat object, to lift the lid up.
2. lnsert the battery so the contacts line up with those of the camera.
Getting Started
Turn On
Press and hold the Power/Mode Button for 3 seconds. When the camera is
turned on, the blue Operation Indicator turns on.
Turn Off
Press and hold the Power/Mode Button for 3 seconds.
To Next Page
Loading...
