51
Preparing the Camera for Use
Caution:
1. When the battery power is insufficient, the message ”Low battery“ flashes on the LCD screen.
The camera will switch off shortly afterwards.
2. Remove the battery if you are not going to use the camera for a long time. This can prolong
the life of the battery and the camera.
Charge the battery:
1. If you want to charge the camera, connect the USB-C cable and a suitable adapter
(5.0 V 1.0 A – 2.0 A, adapter is not included) to the camera.
2. While charging, the red indicator lights up continuously, when the camera is fully charged,
the indicator turns off.
Note: It normally takes about 2 – 3 hours to fully charge the battery. When the battery is fully
charged, the battery life is about 70 minutes.
To Next Page
Loading...
